Trusted Since 2005| +202 2705 2005| [email protected]| 1 to 10 Year Warranty| Ships Worldwide to 100+ Countries| Every Part Tested & Warranted| 500,000+ Enterprise Parts| Dell · HPE · IBM · Lenovo · Cisco|Trusted Since 2005| +202 2705 2005| [email protected]| 1 to 10 Year Warranty| Ships Worldwide to 100+ Countries| Every Part Tested & Warranted| 500,000+ Enterprise Parts| Dell · HPE · IBM · Lenovo · Cisco

Migrating from Dell PowerEdge R630 to R650 — 1U Generation Upgrade

R630 shipped September 2014. Dell publishes no fixed end-of-support date; ProSupport coverage ends per service tag, and Dell ended iDRAC8 firmware fixes for 13G in February 2024. R650 (15G, Ice Lake) is the 1U successor with three generations of improvements compressed into the same chassis footprint. For edge sites, colo-deployed telecom, and branch-office 1U infrastructure, this is the migration most customers are running through 2026.

What actually changed

R630 (13G)R650 (15G)
ReleasedSeptember 2014March 2021
CPUXeon E5-2600 v3/v4Xeon Scalable Gen 3 (Ice Lake)
Max cores/socket22 (E5-2699 v4)40 (Platinum 8380)
Memory1.5TB DDR4-24004TB DDR4-3200
DIMM slots2432
PCIeGen 3Gen 4
Drive bays8–10 SFF8–10 SFF (all NVMe capable)
OEM supportPer service tag (iDRAC8 firmware fixes ended February 2024)Per service tag

Reusability

Across one generation jump (R730 → R740) a fair amount of parts cross over. Across two jumps (R630 → R650) much less does:

  • CPUs — no. Different socket (LGA 2011-3 → LGA 4189).
  • Memory — no. DDR4 standard the same, but R630 uses 2400-max sticks, R650 trains 3200 natively. Mixing will clock down the new chassis to R630-era speed — partial defeat of the upgrade.
  • Bare drives (2.5″ SAS/SATA) — yes, electrically. Caddies — no, latch changed.
  • PSU — no, connector changed.
  • PERC — no (H730 → H755 different family, different riser).
  • Network cards — partially. 10 GbE Intel X520/X540 cards from R630 era still seat in R650 PCIe 4.0 slots (down-clock to Gen 3), but for PCIe 4.0 or 25 GbE workloads you want new NICs.

Parts list for a typical R650 build

Replacing an R630 running 15–20 VMs, 256GB working set, 4TB data:

  • R650 chassis — on quote (refurb)
  • 2 × Xeon Silver 4314 or Gold 6338 (Gen 3) — on quote (refurb pair)
  • 16 × 32GB DDR4-3200 RDIMM (512GB) — on quote (refurb). PNs: 6VDNY, 74FPM, 75X1V, HF6GX.
  • PERC H755 or H755N (NVMe) — on quote (refurb)
  • 8 × 1.92TB SAS SSD or 4 × 3.84TB NVMe — on quote. PNs: 0184M, 01Y7M, 03VVP, 08M01, 0D4GH, 0HVC7.
  • 2 × 1100W Titanium PSU — on quote. PNs: 1JDDV, 1Y45R, 38GYJ.
  • iDRAC9 Enterprise 15G — on quote

Total per node: quoted per configuration (refurb).

R630 trade-in

ICD EKODAQ R630 trade-in: valued per unit on inspection. Data destruction included. Bulk fleet trade-ins (20+ nodes) negotiated on a per-project basis.

Migration approach

Most R630 deployments are virtualisation hosts. The clean path:

  1. Stage at least one R650 in the target cluster or as a separate cluster.
  2. vMotion / Live Migration workloads off the first R630 — sustain uptime, validate R650 performance.
  3. Rebuild the R630 as an R650 staging host; repeat.
  4. Retire R630 hosts in reverse order, final R650 install last.

For physical workloads: backup + restore is standard. Windows Server 2016/2019 backups restore cleanly to R650 hardware — Dell driver package covers 15G detection.

Timeline

For a 10-node R630 → R650 refresh: 6–10 weeks from RFQ to last R630 retired. Bottleneck is almost always parts delivery (3–4 days from Cairo to the GCC, 2–4 to North Africa, after sourcing) and staging time.

Care+ alternative

ICD Care+ TPM on R630 extends hardware cover 3–5 years. Quoted per node per year. Parts channel for R630 is tightening — specific DIMM densities (64GB LRDIMM) and certain PSU SKUs have 2–6 week lead times as of mid-2026. Care+ is a viable 12–24 month bridge but not a 5-year destination.

Next steps

Submit an RFQ specifying node count, current R630 spec, target workload. ICD responds within 24 hours with a full R650 spec and migration plan.

Regional execution

For Egyptian bank and telecom customers running sizeable R630 fleets (30+ chassis common across 2014–2018 refresh cycles), ICD offers staged migration — new R650 chassis staged at customer DC as nodes arrive, old R630s retired one at a time with workload drained via vMotion. Zero customer downtime, 2–4 week total project window per 10-node cluster.

For Gulf customers in Dubai, Abu Dhabi, Riyadh, and Doha, ICD ships direct from Cairo and coordinates on-site installation via field engineers. Installation support is quoted per project and covers rack, cable, power-up, BIOS/firmware update, iDRAC config, RAID init, OS install if requested.

Payment and financing

ICD quotes and invoices in USD by wire transfer; payment terms are stated on each quote.

Documentation package

Every R650 build from ICD ships with: Dell original documentation, ICD build certificate (PNs, serials, warranty start date), hardware-health baseline report from iDRAC post-validation, and — for EKODAQ-associated trade-in — a data destruction certificate for the retired R630 drives.

For a full R630 → R650 migration quote, open an RFQ specifying node count and workload class. ICD returns a staged deployment plan with per-node cost breakdown and project timeline within the working day.

Frequently Asked Questions

Can I reuse R630 memory and processors in a new R650?

No, CPUs cannot move because the socket changed from LGA 2011-3 to LGA 4189. Memory is also not reusable: the R630 uses 2400-max sticks while the R650 trains 3200 natively, and mixing clocks the new chassis down to R630-era speed. Bare 2.5″ SAS/SATA drives are electrically reusable, but caddies are not because the latch changed.

When does OEM support end for the PowerEdge R630 and R650?

Dell publishes no fixed end-of-support date for either server; ProSupport coverage ends per service tag, and Dell ended iDRAC8 firmware fixes for the 13G R630 in February 2024. The R630 shipped in September 2014 and the R650, a 15G Ice Lake 1U successor, was released in March 2021, offering up to 40 cores per socket, 4TB of DDR4-3200 and PCIe Gen 4.

How long does a 10-node R630 to R650 refresh usually take?

A 10-node refresh typically takes 6–10 weeks from RFQ to the last R630 retired. The bottleneck is almost always delivery of components, at 3–4 days from Cairo to the GCC and 2–4 to North Africa after sourcing, plus staging time. A staged migration can run a 2–4 week project window per 10-node cluster.

Can existing 10 GbE network cards move from an R630 to an R650?

Partially: 10 GbE Intel X520/X540 cards from the R630 era still seat in R650 PCIe 4.0 slots, though they down-clock to Gen 3. For PCIe 4.0 or 25 GbE workloads you want new NICs. Power supplies and PERC controllers do not carry over, since the PSU connector changed and the H730 to H755 move is a different family.

Last updated

Worldwide Shipping

Fast delivery to 100+ countries

Tested & Warranted

Every part fully tested before shipping

Enterprise Grade

Dell, HPE, Lenovo & Cisco parts

Dedicated Support

Expert team for quotes & technical help