NAS & File Storage Servers

Request a Quote Contact Sales

Every organization reaches a point where shared drives on a desktop or a single disk array are no longer enough. Growing file volumes, compliance requirements, multi-site access, and backup retention policies demand purpose-built storage infrastructure. ICD supplies enterprise NAS appliances from NetApp, QNAP, and Synology alongside storage-optimized servers from Dell and HPE — with verified-compatible drives, controllers, and expansion shelves from our 500,000+ part inventory.

Configure Your Solution WhatsApp Expert

File and block storage needs vary enormously. A media production company needs high-throughput sequential access to large video files. A legal firm needs deduplicated, encrypted archive storage with immutable snapshots. A data center needs petabyte-scale tiered storage with SSD caching and replication to a DR site.

The common thread is reliability: storage systems must protect data against drive failures, controller failures, and human error. That means enterprise-grade drives (not desktop drives), redundant controllers, battery-backed cache, and tested RAID configurations.

Recommended Specifications

Component	Minimum	Recommended	Notes
CPU	Intel Xeon E-2334 (4 cores) or NAS appliance built-in	Dual Intel Xeon Silver 4310 (24 cores total)	CPU matters for deduplication, compression, encryption, and SMB/NFS protocol handling
RAM	32 GB ECC	128 GB – 256 GB DDR4/DDR5 RDIMM	File system metadata caching dramatically improves small-file performance; ZFS needs 1 GB RAM per TB
Storage	4x 4 TB SAS HDD 7.2K in RAID 5/6	12-24x 18 TB SAS HDD 7.2K in RAID 6 + 2x 1.92 TB SSD read cache + 2x 800 GB NVMe write log	RAID 6 protects against dual drive failure; SSD cache eliminates HDD random-read penalty
Network	Dual 10GbE (LACP bonded)	Dual 25GbE SFP28 or 4x 10GbE (multi-path)	Storage network bandwidth must match aggregate client throughput
RAID / HBA	Hardware RAID controller with battery-backed cache	Dell PERC H755 / HPE P408i, or HBA mode for ZFS/TrueNAS	Hardware RAID for traditional NAS; HBA passthrough for software-defined storage

Recommended Servers

NetApp FAS2820

Entry-to-midrange unified storage with ONTAP — supports NFS, SMB, iSCSI, and S3 with built-in deduplication and snapshots.

QNAP TS-h3088XU-RP

30-bay rackmount NAS with Xeon processor, ZFS-based QuTS hero, and all-flash or hybrid configurations.

Synology RS3621xs+

12-bay enterprise NAS with Active Backup for Business, Btrfs snapshots, and expansion up to 36 drives.

Dell PowerEdge R760xs

12-bay LFF 2U server supporting 18 TB SAS drives for up to 216 TB raw in 2U.

HPE ProLiant DL380 Gen10 Plus

Flexible 2U platform with LFF and SFF bay options, proven HPE Smart Array controllers.

Dell PowerVault ME5024

Dual-controller SAN/NAS with up to 24 SAS SSD/HDD bays and expansion to 276 drives.

Compatible Parts

SAS HDDs (LFF 3.5”) SAS SSDs RAID Controllers NetApp Drives & Shelves QNAP & Synology Parts SFP Transceivers

Why ICD?

Drive Compatibility Guaranteed

Genuine OEM drives verified compatible with your controller and firmware — no drive rejection or degraded arrays

Multi-Vendor Storage

NetApp, QNAP, and Synology parts in stock alongside Dell and HPE server components

Storage Engineers

Engineers who understand RAID levels, tiered caching, deduplication ratios, and capacity planning

Global Express Delivery

Ships to Egypt, KSA, UAE, and worldwide with tracked logistics

Ready to Build Your Storage Solution?

NAS appliances, storage servers, or expansion shelves — configured for your capacity and performance needs.

Request a Quote WhatsApp Us

Frequently Asked Questions

Should I buy a NAS appliance or build a storage server?

NAS appliances (NetApp, QNAP, Synology) provide an integrated, vendor-supported experience with built-in data management features. Building a storage server gives you more hardware flexibility and can be more cost-effective at scale.

Can I mix HDD and SSD in the same storage system?

Yes, and it is recommended. A hybrid configuration uses SSDs as a read cache in front of large-capacity HDDs, giving you cost-per-TB of HDDs with near-SSD performance for frequently accessed files.

What RAID level should I use for file storage?

RAID 6 (dual parity) is the standard for file storage with large-capacity drives. With 18 TB drives, a single-drive rebuild takes 12-24 hours. RAID 6 tolerates two simultaneous failures.

How do I size my storage network?

Calculate peak concurrent throughput: if 50 users each need 200 MB/s, that is 10 Gb/s. Always use a dedicated storage VLAN with jumbo frames (9000 MTU) enabled end-to-end.

Explore More

Get a free infrastructure audit and custom proposal. Our team responds within one business day.

Request a Quote Contact Us

Tel: +202 27052005Email: [email protected]