Quantum Tape Library Upgrade Guide
Maximize the performance and lifespan of your Quantum Tape Library. Every upgrade option below is verified compatible.
Verified Specifications
| Processor Options | IBM LTO FH/HH drives; LTO-10 FH on Scalar i6/i6000 (40 TB native / 100 TB compressed per cartridge) |
| Drive Configurations | Scalar i3: 3U modules, 25-800 slots (CoD 25-slot steps), 1-24 drives, up to 36 PB compressed (LTO-9); Scalar i6: 6U modules, 100 slots + 3 FH drives each, up to 80 PB compressed per rack (LTO-10); Scalar i6000: 100-14,100 cartridges, up to 1,410 PB |
| Networking Options | 8Gbps FC + SAS drive connections, 1GbE management, 10GbE iBlade |
| Specification Source | Quantum official documentation (verified 2026-07-02) |
Frequently Asked Questions
Upgrade Storage
Moving from spinning disk to SSD or NVMe storage provides the largest single performance improvement — often 10-50x faster I/O. Consider NVMe for boot drives and high-IOPS workloads.

3-00036-02 Quantum Scalar I6000 Operator Panel Switch Assembly

3-03637-03 Quantum Scalar I6000 Picker Robot Complete Assembly

3-04950-02 Quantum Scalar I3/I6 Generation 1 Robotics Assembly

3-05236-01 Scalar I40 Tape Library Chassis with LTO-6 Drive

3-05700-03 Quantum Scalar I6000 GEN2 Picker Assembly Complete

3-05730-02 Quantum Scalar I6000 GEN2 Picker Assembly
Upgrade Controllers
Upgrading your RAID controller enables faster disk I/O, larger cache, and support for newer drive technologies. Essential when adding NVMe or SAS-4 drives.

2-00907-05 Quantum Scalar I3 System Control Board (scb)

3-00529-08 Quantum Scalar I6000 GEN2 VER1 Robot Control Unit (rcu)

3-01994-06 Quantum Scalar I6000 GEN2 VER1 Management Control Blade (mcb)

3-01994-14 Quantum Scalar I6000 GEN2 VER2 Management Control Blade (mcb)

3-01995-04 Quantum Scalar I6000 Chassis Management Blade with Flash

3-01995-07 Quantum Scalar I6000 GEN2 Control Management Blade (cmb)
Upgrade Power Supplies
Higher-wattage PSUs provide headroom for future upgrades — more RAM DIMMs, GPUs, or additional drives. Redundant hot-swap PSUs also protect against single-point power failures.

1-00074-22 Quantum Scalar I6000 GEN2 Power Supply

3-02742-12 Quantum Scalar I6000 Hdem 48V 350W PSU

3-04611-01 Quantum Scalar I6000 GEN3 PSU

3-07014-03 Quantum Scalar I3 Power Supply 315W

3-07711-01 Quantum Scalar I6 Control and Expansion Module Power Supply 440W

LSC33-APWR-001A Quantum Scalar I3 Power Supply 80 Plus Certified
More Quantum Tape Library Resources
Ready to upgrade your Quantum Tape Library?
Tell us your current configuration and workload. Our engineers will recommend the most impactful upgrades with guaranteed compatibility.
Get Upgrade Quote