Migrating from HPE ProLiant DL380 Gen10 to DL380 Gen11 — Parts, Timeline and Budget Guide
Written for IT leaders planning an HPE ProLiant refresh in 2026. All specs and part numbers come from HPE QuickSpecs and ICD’s live catalog. For fleets already on Cascade Lake Gen10, the Gen11 jump delivers AMX instructions for AI inference, DDR5 bandwidth, and iLO 6 Security Dashboard. Ice Lake → Sapphire Rapids is the shortest defensible refresh path.
Why this migration
HPE has retired the DL380 Gen10 from sale and has published no end-of-support date. Beyond end of support, HPE post-warranty pricing escalates, SPP firmware bundle cadence drops, and iLO CVE patches tail off. DL380 Gen11 resets the lifecycle clock, brings DDR5 bandwidth, AMX AI tile instructions, and — critically in 2026 — aligns you with HPE’s active security train (iLO 6).
OEM support timeline
HPE has published no end-of-support date for the DL380 Gen10, so check your coverage with HPE by serial number. After end of support, HPE parts availability becomes best-effort, OneView firmware bundles ship less frequently, and critical CVE patches for iLO/BIOS taper off.
Your DL380 Gen11 is on HPE’s current product line. New HPE SPP (Service Pack for ProLiant) drops land first on the active platforms, which means your security posture improves measurably post-migration.
Compatibility analysis
The DDR4 → DDR5 transition is the single biggest compatibility barrier. DDR5 UDIMM/RDIMM uses 288 pins at 1.1V versus DDR4 at 1.2V; notch positions differ; PMIC is on-DIMM rather than on-motherboard. Zero mechanical carry-over. Expect full memory replacement for this path.
| Subsystem | DL380 Gen10 | DL380 Gen11 | Carry-over |
|---|---|---|---|
| CPU socket | LGA3647 | LGA4677 | No — full CPU replacement |
| Memory (DDR4 → DDR5) | 3TB DDR4-2933 | 8TB DDR5-4800/5600 | No — DDR4 not pin-compatible with DDR5 |
| Storage backplane | Smart Array P408i-a / P816i-a SR Gen10 (12G SAS) | Broadcom MegaRAID MR216i-p / MR416i-o | No — controller family change (Smart Array → MR) |
| Drive carriers 2.5″ SFF | HPE Gen10 carrier | HPE Gen11 carrier | Check per drive — order the carrier HPE QuickSpecs lists for the target server |
| Power supplies | 500W-2200W Flex Slot | 800W-2200W Flex Slot (Platinum and Titanium) | Partial — Flex Slot form factor preserved |
| Rails + CMA | HPE Gen10 rail kit | HPE Gen11 rail kit | Partial — most 2U Gen10 rails accept Gen11 chassis with adapter |
| iLO generation | iLO 5 | iLO 6 | Advanced license transferable with HPE-assisted entitlement move |
Smart Array → MR controller implications
The controller line change from HPE Smart Array to Broadcom-based MR (MegaRAID) controllers on Gen11 is more than a rebrand. Three operational impacts matter in a migration:
- Cache protection hardware changes. The HPE Smart Storage Battery kit (for example 871264-001 with a 145 mm cable or P01367-B21 with a 260 mm cable) depends on the controller and chassis — order the kit HPE QuickSpecs lists for the target controller.
- Array metadata format changes. You cannot physically move an array built on a Smart Array P408i-a into an MR216i-p and expect it to import. The data must be migrated via replication (storage vMotion, DB log shipping, rsync, etc.) — not drive-pulled and re-inserted.
- Management tooling changes. HPE Smart Storage Administrator (SSA) scripts and Ansible modules do not target MR controllers. Rewrite or port to storcli64 / Redfish MR schemas.
Data migration path
Depending on what sits on the DL380 Gen10, the data path varies. For hypervisor hosts (VMware vSphere, Nutanix, KVM, Hyper-V) the cleanest path is live workload migration — vMotion, Nutanix Move, Live Migration — node-by-node. Provision one DL380 Gen11 alongside the cluster, add it as a node, evacuate one DL380 Gen10, retire the DL380 Gen10, repeat. ICD has delivered 40+ of these phased VMware refreshes in the region with near-zero downtime.
For bare-metal databases (Oracle, MSSQL, PostgreSQL) use native replication: Oracle Data Guard, SQL Server AG, PG streaming replication. Target DL380 Gen11 becomes the standby, then failover during a planned window. This protects RPO strictly and lets you roll back if the DL380 Gen11 hits an unexpected issue during burn-in.
For file servers, backup targets, and archive the classic rsync or Robocopy approach works — but plan for longer windows if you are moving from 12G SAS SFF to NVMe E3.S, as the target can ingest 4-10x faster than the source can read.
Parts shopping list (real PNs in ICD’s catalog)
- Target CPU (DL380 Gen11): Xeon Scalable Gen4/Gen5 processors (kit part numbers are specific to each chassis, quoted for your exact server)
- Target memory (DDR5): P43328-B21 (32GB RDIMM DDR5-4800), P43331-B21 (64GB RDIMM DDR5-4800), P50311-B21 (32GB 2Rx8 DDR5-4800), P50312-B21 (64GB 2Rx4 DDR5-4800), P43334-B21 (128GB DDR5-4800 3DS)
- Target controller: P26324-B21 (MR216i-a 12G), P26279-B21 (MR416i-a 12G), P06367-B21 (MR416i-p 12G), P04220-B21 (SR416i-a 24G Tri-Mode), P12688-B21 (SR416i-a 24G)
- Target PSU: P38995-B21 (800W FS Platinum), P18224-B21 (800W FS Titanium)
- Source spares available (DL380 Gen10) for ICD Care+ bridge: 826846-B21 (Xeon Silver 4110), 826850-B21 (Xeon Silver 4114), P00922-B21 (16GB RDIMM DDR4-2933), P00924-B21 (32GB RDIMM DDR4-2933), 804331-B21 (P408i-a SR Gen10), 804338-B21 (P816i-a SR Gen10)
Budget reality in USD
Get a free infrastructure audit and custom proposal. Our team responds within 24 hours.
Migration phases and next steps
- Baseline (week 1). Export current iLO configs, HPE OneView inventory, Smart Array drive maps, BIOS settings, and firmware levels for every DL380 Gen10 node in scope. ICD provides a free export script on request.
- BOM design (week 1-2). RFQ to ICD for BTO DL380 Gen11 configs. ICD returns a cost-audited BOM in 24 hours with HPE part numbers, warranty posture, and lead-time visibility.
- Pilot (week 3-5). Deploy one DL380 Gen11 pilot node. Migrate one non-critical workload (typically a dev/test VM, a secondary DB replica, or a file-server target). Validate performance under load, iLO Redfish scripts, and your backup integration.
- Rolling production cutover (week 5-12). Phased migration by application window. Each DL380 Gen10 node evacuated, retired, optionally repurposed for DR or returned to ICD under buy-back credit.
- Post-migration (week 13+). Turn off HPE support on the retired fleet (or keep it if you are holding as cold spares), re-baseline capacity plans against the new platform headroom, and document the new BOM for next-cycle planning.
Get a migration BOM + TCO model
ICD returns a full BOM, pilot-node quote, phased migration plan, and optional ICD Care+ bridge pricing within 24 hours.
Request a Migration QuoteFrequently Asked Questions
When does vendor support end for the DL380 Gen10?
HPE has retired the DL380 Gen10 from sale and has published no end-of-support date. After end of support, parts availability becomes best-effort, OneView firmware bundles ship less often and critical iLO/BIOS CVE patches taper off. The Gen11 is on HPE's current product line.
Can we keep our DL380 Gen10 rails and drive carriers for Gen11?
Partly. CPUs, DDR4 memory and the Smart Array controllers do not carry over, since Gen11 uses a new socket, DDR5 and Broadcom MegaRAID MR controllers. Drive carriers and rail kits are specific to each generation, so order the ones HPE QuickSpecs lists for the Gen11.
What does the pilot phase involve when moving DL380 Gen10 to Gen11?
In weeks 3 to 5 you deploy one DL380 Gen11 pilot node and migrate one non-critical workload, typically a dev/test VM, a secondary DB replica or a file-server target. You then validate performance under load, iLO Redfish scripts and backup integration before the rolling production cutover in weeks 5 to 12.
How should file shares and backup targets be copied to a DL380 Gen11?
The classic rsync or Robocopy approach works for file shares, backup targets and archive. Plan for longer windows if you are moving from 12G SAS SFF to NVMe E3.S, because the target can ingest 4 to 10 times faster than the source can read.
