HPE Server Power Supplies in Saudi Arabia
ICD supplies genuine HPE Server Power Supplies to data centres and enterprises across Saudi Arabia. Saudi Arabia is the largest server-hardware market in the Gulf, driven by Vision 2030 digital programmes and the data-centre demand behind NEOM and the giga-projects. Every part is a real, identifiable HPE SKU — sourced, verified and matched to your ProLiant or HPE storage platform.
HPE Power Supplies we supply in Saudi Arabia
The lines below are representative of the HPE power supplies ICD moves into Saudi Arabia, from current-generation parts such as 876929-B21 HPE 2900/3400W Hot-Plug Titanium Power Supply Kit to mature, hard-to-find SKUs like P12954-001 HPE MSA 2060 580W Power Supply that keep older estates running. Each is matched to the server it belongs in before it ships.
| HPE Part | Capacity / Rating | Interface / Form factor | Order |
|---|---|---|---|
| 876929-B21 | 2900/3400 W | Hot-Plug / Titanium / Flex Slot | View part |
| P12954-001 | 580 W | Hot-Plug / Storage PSU | View part |
| JC089A | 750 W | AC / Switch PSU | View part |
| 236845-021 | 600 W | Hot-Plug / Redundant | View part |
| 405914 | 575 W | Storage PSU / MSA | View part |
HPE Flex Slot power: wattage, redundancy and efficiency
HPE ProLiant power is built around the Flex Slot design, where a common bay accepts power supplies of different ratings — commonly 500W, 800W and 1600W on mainstream DL servers, scaling higher on dense and storage platforms. The correct wattage is a function of CPU count, GPU load and drive population, and HPE’s Power Advisor is the reference for sizing a given configuration.
For uptime, supplies are deployed in hot-plug redundant (N+1 or 2+2) pairs, so a failed unit is replaced without downing the server — provided the replacement matches the installed wattage and the chassis stays balanced. HPE PSUs carry 80 PLUS efficiency ratings up to Titanium, which matters directly for power and cooling cost in dense racks. ICD matches the exact Flex Slot rating and efficiency class already in your servers so redundancy is preserved.
Sourcing HPE power supplies in Saudi Arabia
Workloads are spread across Riyadh, Jeddah and Dammam, with new capacity rising alongside the giga-project pipeline. The scale of these estates makes a reliable HPE spares channel a core operational requirement rather than a convenience. Hardware imported into the Kingdom must satisfy SABER/SASO conformity, and ICD prepares HPE shipments with that requirement in mind so clearance into Riyadh, Jeddah or Dammam is predictable. Onward delivery reaches the major industrial and government estates across the central, western and eastern provinces. A part such as JC089A HPE 5800 750W AC Power Supply is sourced against the specific configuration in your fleet, not pushed as a generic substitute.
Before you order
A short checklist that saves a return when ordering HPE power supplies for Saudi deployments:
- Size wattage to CPU/GPU/drive load using HPE Power Advisor for your exact build.
- Match the replacement rating to the installed Flex Slot PSU so redundancy stays balanced.
- Decide the redundancy model (N+1 / 2+2) and populate both bays for hot-plug protection.
- Confirm the 80 PLUS efficiency class to control rack power and cooling cost.
Send ICD your server model, current configuration and the part numbers you are replacing, and our team confirms exact compatibility before you buy.
Frequently Asked Questions
Are ProLiant power supplies prepared for SABER/SASO import clearance into the Kingdom?
Shipments are prepared with the SABER/SASO conformity requirement in mind, so clearance into Riyadh, Jeddah or Dammam is predictable. Onward delivery reaches the major industrial and government estates across the central, western and eastern provinces. The scale of these estates makes a reliable spares channel a core operational requirement rather than a convenience.
What does N+1 or 2+2 redundancy mean for replacing a failed supply?
In hot-plug redundant N+1 or 2+2 configurations, a failed unit is replaced without taking the host down, as long as the replacement matches the installed wattage and the chassis stays balanced. Decide the redundancy model up front and populate both bays for hot-plug protection, then match the existing Flex Slot rating and efficiency class.
What is the largest power supply listed for dense ProLiant platforms?
The 876929-B21 2900/3400W hot-plug Titanium kit is the highest-rated supply in the listed range, using the Flex Slot design. Mainstream DL systems more commonly run 500W, 800W or 1600W supplies, with ratings scaling higher on dense and storage platforms. Size the build with Power Advisor before choosing a rating.
Will a replacement with a different wattage keep my supplies redundant?
No, the replacement rating must match the installed Flex Slot supply so redundancy stays balanced. The common bay accepts supplies of different ratings, but a failed unit is replaced without downtime provided the new one matches the installed wattage. Send your model, current configuration and the numbers you are replacing so compatibility is confirmed.