HPE Hard Drives in Saudi Arabia
ICD supplies genuine HPE Hard Drives to data centres and enterprises across Saudi Arabia. Saudi Arabia is the largest server-hardware market in the Gulf, driven by Vision 2030 digital programmes and the data-centre demand behind NEOM and the giga-projects. Every part is a real, identifiable HPE SKU — sourced, verified and matched to your ProLiant or HPE storage platform.
HPE Hard Drives we supply in Saudi Arabia
The lines below are representative of the HPE hard drives ICD moves into Saudi Arabia, from current-generation parts such as 785087-005 HPE 900GB 12G 10K 2.5in DP SAS HDD to mature, hard-to-find SKUs like 507750-S21 HPE 7.2K SAS HDD 2.5 SFF that keep older estates running. Each is matched to the server it belongs in before it ships.
| HPE Part | Capacity / Rating | Interface / Form factor | Order |
|---|---|---|---|
| 785087-005 | 900 GB | 12G SAS / 10K / SFF 2.5in | View part |
| 507750-S21 | — | 6G SAS / 7.2K / SFF 2.5in | View part |
| R0Q60A | 10 TB | 12G SAS / 7.2K / LFF 3.5in | View part |
| R0Q67A | 2.4 TB x6 | 12G SAS / 10K / SFF 2.5in | View part |
| AT086AR | 300 GB | 6G SAS / 15K / SFF 2.5in | View part |
Choosing the right HPE drive: carrier, generation and firmware
Every HPE ProLiant hard drive ships in an HPE SmartDrive carrier, and the carrier dictates fit before the spindle ever matters. SFF (2.5-inch) drives populate the front bays of DL360, DL380 and most Gen9/Gen10/Gen11 servers, while LFF (3.5-inch) carriers serve high-capacity nearline bays and the MSA storage line. A Gen10 SmartDrive carrier and a Gen8 carrier are not interchangeable, so matching the carrier to the chassis generation is the first check.
Interface and rotational speed set the workload fit: 15K and 10K SAS drives suit transactional and virtualisation tiers, while 7.2K SAS midline drives carry bulk and backup capacity. From Gen10 onward HPE enforces digitally-signed drive firmware as part of its silicon root of trust, so a genuine HPE-firmware drive is required for clean iLO health reporting — a point ICD verifies on every unit it ships.
Sourcing HPE hard drives in Saudi Arabia
Workloads are spread across Riyadh, Jeddah and Dammam, with new capacity rising alongside the giga-project pipeline. The scale of these estates makes a reliable HPE spares channel a core operational requirement rather than a convenience. Hardware imported into the Kingdom must satisfy SABER/SASO conformity, and ICD prepares HPE shipments with that requirement in mind so clearance into Riyadh, Jeddah or Dammam is predictable. Onward delivery reaches the major industrial and government estates across the central, western and eastern provinces. A part such as R0Q60A HPE MSA 10TB SAS 12G Midline 7.2K LFF 3.5in M2 HDD is sourced against the specific configuration in your fleet, not pushed as a generic substitute.
Running this hardware past HPE’s support date? See HPE end-of-life support in Saudi Arabia for parts and maintenance cover.
Before you order
A short checklist that saves a return when ordering HPE hard drives for Saudi deployments:
- Confirm the SmartDrive carrier generation (Gen8/Gen9/Gen10/Gen11) matches your chassis.
- Match form factor to the bay: SFF 2.5in for front drive cages, LFF 3.5in for nearline / MSA.
- Check the controller supports your chosen RPM and capacity (Smart Array vs HBA).
- On Gen10+, insist on genuine HPE-firmware drives for clean iLO health and root-of-trust.
Send ICD your server model, current configuration and the part numbers you are replacing, and our team confirms exact compatibility before you buy.
Frequently Asked Questions
Which ProLiant models use SFF drives and which use LFF carriers?
SFF 2.5-inch drives populate the front bays of DL360, DL380 and most Gen9/Gen10/Gen11 systems, while LFF 3.5-inch carriers serve high-capacity nearline bays and the MSA storage line. Every drive ships in a SmartDrive carrier, and the carrier dictates fit before the spindle matters, so match the carrier generation to the chassis first.
Will a drive without genuine firmware report cleanly in iLO on Gen10?
No, from Gen10 onward digitally-signed drive firmware is enforced as part of the silicon root of trust, so a genuine-firmware drive is required for clean iLO health reporting. This is verified on every unit shipped. Send your model, current configuration and the part numbers you are replacing so exact compatibility is confirmed before you buy.
Is a generic substitute offered when an exact MSA drive is needed?
No, a drive such as the R0Q60A MSA 10TB SAS 12G Midline 7.2K LFF 3.5in is sourced against the specific configuration in your fleet, not pushed as a generic substitute. The scale of estates across Riyadh, Jeddah and Dammam makes a reliable spares channel a core operational requirement rather than a convenience.